Project

General

Profile

Controlling PeopleBot using DDR (Dance Dance Revolution) Pad

Added by Anonymous over 8 years ago

DDR pad was hacked and used to control PeopleBot.

This hack involved using the wires from the contact sensors of the pad and an Arduino to check for contact. This info was then transmitted to a PC through the serial port. This info was then relayed to the PeopleBot, which was configured in joystick mode.


Comments

Added by Anonymous over 8 years ago

[BUG Alert] Due to the common grounding in the DDR pad, the signals to the Arduino were bouncing at times. Effect was less at low baudrate.