Project

General

Profile

Spent time

Filters

Apply Clear

Hours: 131.50

Date User Activity Issue Comment Hours
12/06/2012 Anonymous Development Task #2250: Pott PCB Potted, was messy and not as good as desired but it was completed at 400 am since 24 hours to dry 2.00
12/06/2012 Anonymous Development Task #2248: Program Microcontroller Uploaded code to three boards, the fourth is busted due to my incompetence. 1.00
12/06/2012 Anonymous Development Task #2247: Power up PCB components Debugging cursed us.... reflow to blame..... 10.00
12/06/2012 Anonymous Development Task #2245: Modify frisbee to attach LEDs and PCB Dremeled down and high spots, and removed previous blinking device from frisbee. 1.00
11/27/2012 Anonymous Development Task #2238: Research soldering techniques Tyler directed me to using Toaster Oven..... 1.00
11/27/2012 Anonymous Development Task #2241: Test solder Test Soldering using Toaster at home with Gyro and protoboard 1.00
11/27/2012 Anonymous Development Task #2239: Purchase solder and potting materials Purchased Epoxy Putty from Smooth-On website and solder from Fry's 1.00
11/27/2012 Anonymous Development Task #2255: Document test plan Modified plan, worked on it some more, modified plan, worked on it some more...... 3.00
11/27/2012 Anonymous Development Task #2254: Create 4 test cases Created 4 test cases, Compared to PDS and System Models 6.00
11/27/2012 Anonymous Development Task #2244: Purchase frisbees I bought two frisbees 1.00
11/27/2012 Anonymous Development Task #2240: Test potting Took 24 hours to dry....... 1.00
11/27/2012 Anonymous Development Task #2237: Research potting techniques Found wonderful website Smooth-On with putty epoxy that is lightweight and will do the trick. 2.00
11/27/2012 Anonymous Development Task #2235: Order Components Went off the BOM Tyler posted and ordered some parts. Still think we are short considerably, will find out when it comes down to build. 1.00
11/27/2012 Anonymous Development Task #2222: Finalize test code Spent considerable time cleaning up the code, trial, cleaning up, trial..... Should have been more organized with outline first before hacking. 6.00
11/27/2012 Anonymous Development Task #2221: Create code to turn on LED based on A/D value The clearbit and setbit define made this easy.... 2.00
11/27/2012 Anonymous Development Task #2220: Create code to read A/D value from analog input Took awhile to understand relationship between Gyro Sensor reference voltage and AVR Refference voltage and ADC output 5.00
11/27/2012 Anonymous Development Task #2219: Create code to initialize ports Created a clearbit and setbit define to make it easier, and Using the ISP defaults as programmed on Port B. 3.00
11/27/2012 Anonymous Development Task #2218: Create code to initialize A/D converter Analog input had to be at 50-250 Khz so setting Pre-scalar was difficult in wrappig my brain around, now understood. 1.50
11/27/2012 Anonymous Development Task #2217: Research inline debugger run tutorial Ran tutorial..... 3.00
11/27/2012 Anonymous Development Task #2217: Research inline debugger run tutorial Found the JTAGICE3 at ATMEL website for $100.00 0.50
11/27/2012 Anonymous Development Task #2216: Research Inline programmer run tutorial Originally bought a AVRisp MK II but it didn't allow for Inline debugging just programming. JTAGICE3 1.00
11/27/2012 Anonymous Development Task #2215: Install AVR Studio 6; run tutorial Installing didn't take long, tutorial took awhile.... 3.00
11/27/2012 Anonymous Development Task #2214: Research AVR types Went with the smallest we could use and then added a buffer in flash and I/O pins...... 3.00
11/27/2012 Anonymous Development Task #2296: Research Software Requirements Staright to ATMEL AVR website, offers freeware AVR Studio 6.0 to download. 0.50
11/27/2012 Anonymous Development Task #2297: Install Software (IDE) to Program Microcontroller and run tutorial AVR Studio 6.0, 0.50
(1-25/56) Per page: 25, 50, 100

Also available in: Atom CSV