10/18/2013 12:41 PM
10/18/2013 12:43 PM
10/23/2013 01:23 PM
Make sure tracking is turned on in word.
11/03/2013 01:10 PM
11/10/2013 11:20 PM
This is the parts list for our boards, with components that match the footprints for the PCB.
11/03/2013 04:36 PM
This is a PDF file of our Eagle CAD schematic.
11/03/2013 04:40 PM
Here is version 1 of the completed Eagle CAD schematic with very carefully selected parts with footprints that match our parts order list. This file needs to be viewed in Eagle CAD. If any changes are made, please increment the version number before saving (i.e. v2, v3... etc)....
11/04/2013 10:57 PM
Changed USB connector to 6-pin serial data connector. Also swapped to larger physical size resistors (1W) for easier hand soldering. Updated parts list as well.
11/04/2013 10:59 PM
With different data connector, updated resistors, usb to serial converter cable, and big red button.
11/04/2013 11:00 PM
pdf of schematic v2
11/05/2013 11:54 PM
This is the "final" version of the schematic. This includes the larger resistors, proper serial data port, larger 20 gauge connector, and mosfet for grounding the gun motor.
11/05/2013 11:55 PM
Schematic v3 pdf
11/05/2013 11:57 PM
This is the final parts list for all the board components, except for the arduino chips.
11/09/2013 03:49 PM
Added test points to chip and group names as per Andrews request.
11/09/2013 03:50 PM
11/09/2013 03:51 PM
11/11/2013 12:25 PM
Final list, order placed off of this.
11/11/2013 12:56 PM
PCB v1 with schematic v4 and oshpark DRU file loaded
12/12/2013 10:29 AM
T-07 Team Accounting Sheet (All versions)
11/12/2013 10:48 AM
Voltage regulator was missed previously. Separate order placed for it.
11/14/2013 09:42 AM
The board is smaller and has larger power wires.
11/14/2013 12:11 PM
Updated schematic with the power and gnd swapped for better power flow on PCB
11/14/2013 12:13 PM
Updated board with mounting holes, silk trace info, bottom gnd plane, and corrected errors.
12/10/2013 12:51 PM